Recent Posts (Page 51)
I originally planned to use a single Infinity 10VQ 10″ sub, in a partial fiberglass enclosure using only half of the rear cabin floor. Since I had plenty of power to work with, I decided to go with two 10VQ’s. My measurements said it’d be tight, later I decided it […]
It’s always advisable to apply some type of sound absorption or anti-resonance material when performing an audio installation. These type of products which can come in liquid or mat form, help reduce resonance that is induced by a now more powerful stereo system. This not only improves the sound quality, […]
For my mids and highs, I went with the Infinity Kappa 60.5cs. These are pretty affordable and sound pretty good IMHO. They are a component system, so it icludes a woofer, a tweeter, and crossover. They are the pretty much standard size of 6.5″. ยป Ceramic Metal Matrix Diaphragm Plus […]
I already had one 2 channel Infinity 7521A from my , so I wanted to reuse it in this complete overhaul. It puts out close to 100w RMS per channel, so it would work well driving a pair of components. To complete the system I bought another 7521A to power […]
In order to avoid signal noise and keep things organized I ran signal, power, and speaker wires down the middle, right, and left part of the cabin respectively. In order to run wire down the center of the cabin, the majority of the cabin must be removed. I chose to […]
Latest Posts
Track Junkie
(click track icons for related posts)
EST Recommends
Gallery
