Custom Oil Temp Sensor for AiM MXL
Creating a custom sensor for an AiM MXL dash datalogger using a GM Delphi temp sensor, a pullup resistor, and custom sensor in RaceStudio 2.
-
-
Spec E46 Build Part IX: Electrical
The vast majority of the stock wiring was removed from the car during deconstruction, which I covered in Part I of the build. Fortunately the stereo harness was completely separate from the rest of the chassis wiring. I still had to go wire by wire for things like electric windows, seat […]
-
Sometimes it’s the Simplest Solution
You’d have thought I’d learned my lesson with the brake debacle on the M Coupe. A short recap; a long drawn out brake issue turned out to be simple deformed bleed screws. The take-away; it’s often the simplest of solutions causing your problem. So, before you start rebuilding the top-end […]
-
Last of the Wiring
Removing the entire wiring harness from an E36 M3
-
Wiring and more Wiring
The M3 is practically a bare chassis, except for the rear subframe, fuel tank, and that god forsaken wiring. I anticipated this being the biggest hassle of the build, and so far it has been. The air-conditioning and heating unit require every bit of the dash and support bars to […]
